歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

多槽手動超聲波清洗機：多槽獨立排水系統清洗液分類管理

作者：創始人來源：http://www.ebaisha.cn/時間：2025-05-20

　　在工業清洗領域，多槽獨立排水系統憑借其高效、精準的清洗能力，已成為精密制造、半導體加工等行業的核心設備。該系統通過多級清洗槽的串聯設計，實現了清洗液的梯度利用與污染物分級處理。本文將從技術原理與工程實踐雙維度，系統性闡述清洗液的分類管理體系，為行業提供兼具理論深度與實用價值的解決方案。

　　In the field of industrial cleaning, multi slot independent drainage systems have become core equipment in precision manufacturing, semiconductor processing and other industries due to their efficient and precise cleaning capabilities. The system achieves gradient utilization of cleaning solution and graded treatment of pollutants through a series design of multi-stage cleaning tanks. This article will systematically elaborate on the classification and management system of cleaning solutions from both technical principles and engineering practices, providing the industry with a solution that combines theoretical depth and practical value.

　　一、清洗液分類的必要性

　　1、 The necessity of classifying cleaning solutions

　　多槽獨立排水系統的清洗液需根據化學特性、污染程度及工藝要求實施差異化管理。若采用“一刀切”的管理模式，將導致以下問題：

　　The cleaning solution for a multi tank independent drainage system needs to be managed differentially based on its chemical characteristics, pollution level, and process requirements. If a one size fits all management model is adopted, it will lead to the following problems:

　　清洗效率衰減：交叉污染會破壞清洗液的表面活性，使接觸角增大，導致清洗盲區擴大。

　　Deterioration of cleaning efficiency: Cross contamination can damage the surface activity of the cleaning solution, increase the contact angle, and expand the cleaning blind spot.

　　設備腐蝕加劇：不同pH值清洗液混合后，可能產生電化學腐蝕，縮短設備使用壽命。

　　Equipment corrosion intensifies: After mixing cleaning solutions with different pH values, electrochemical corrosion may occur, shortening the service life of the equipment.

　　廢水處理成本攀升：混合廢水中的重金屬、有機物等污染物濃度波動大，增加生化處理難度。

　　The cost of wastewater treatment is rising: the concentration of pollutants such as heavy metals and organic matter in mixed wastewater fluctuates greatly, increasing the difficulty of biochemical treatment.

　　二、清洗液分類管理體系

　　2、 Classification Management System for Cleaning Liquids

　　1. 化學特性分類

　　1. Classification of chemical properties

　　酸性清洗液：以氫氟酸、檸檬酸等為主要成分，用于去除金屬氧化物。需采用聚丙烯（PP）材質容器存儲，避免與堿性物質共用管路。

　　Acidic cleaning solution: mainly composed of hydrofluoric acid, citric acid, etc., used to remove metal oxides. Polypropylene (PP) material containers should be used for storage to avoid sharing pipelines with alkaline substances.

　　堿性清洗液：以氫氧化鈉、碳酸鈉等為核心組分，針對有機物污染。存儲容器需內襯環氧樹脂涂層，防止堿液滲透。

　　Alkaline cleaning solution: with sodium hydroxide, sodium carbonate and other core components, targeting organic pollution. The storage container needs to be lined with epoxy resin coating to prevent alkali solution from penetrating.

　　有機溶劑：包括異丙醇、丙酮等，用于溶解非極性污染物。需配備防爆型存儲柜，并設置氣體濃度監測裝置。

　　Organic solvents: including isopropanol, acetone, etc., used to dissolve non-polar pollutants. Explosion proof storage cabinets and gas concentration monitoring devices are required.

　　2. 污染程度分級

　　2. Classification of Pollution Levels

　　新液：未使用的原始清洗液，需建立批次管理制度，記錄生產日期、有效期等關鍵參數。

　　New liquid: Unused original cleaning solution, batch management system needs to be established to record key parameters such as production date and expiration date.

　　在役液：正在清洗槽中循環使用的液體，需實施動態監測，包括電導率、pH值、濁度等指標。

　　In service fluid: a liquid that is being circulated in the cleaning tank and requires dynamic monitoring, including indicators such as conductivity, pH value, turbidity, etc.

　　廢液：達到更換閾值的清洗液，需根據污染物類型進行預處理，如重金屬沉淀、有機物萃取等。

　　Waste liquid: Cleaning solution that reaches the replacement threshold needs to be pretreated according to the type of pollutant, such as heavy metal precipitation, organic matter extraction, etc.

　　3. 工藝流程分段

　　3. Segmented process flow

　　預清洗段：使用去離子水或弱堿性清洗液，去除大顆粒污染物。該段清洗液需高頻次更換，防止顆粒物累積。

　　Pre cleaning section: Use deionized water or weakly alkaline cleaning solution to remove large particle pollutants. This cleaning solution needs to be replaced frequently to prevent the accumulation of particles.

　　主清洗段：采用高活性清洗液，針對特定污染物進行深度清潔。需配置在線過濾裝置，維持液體潔凈度。

　　Main cleaning section: using highly active cleaning solution for deep cleaning of specific pollutants. An online filtering device is required to maintain the cleanliness of the liquid.

　　漂洗段：使用超純水進行最終沖洗，確保工件表面無殘留。該段水質需達到電阻率≥18MΩ·cm的標準。

　　Rinse section: Use ultrapure water for final rinsing to ensure that there are no residues on the surface of the workpiece. The water quality of this section needs to meet the standard of electrical resistivity ≥ 18M Ω· cm.

　　三、分類管理實施策略

　　3、 Classification management implementation strategy

　　1. 物理隔離系統

　　1. Physical isolation system

　　管路獨立設計：為每類清洗液鋪設專用管道，采用不同顏色標識。管道接頭處設置單向閥，防止逆流污染。

　　Independent pipeline design: Install dedicated pipelines for each type of cleaning solution, labeled with different colors. Install one-way valves at pipeline joints to prevent backflow pollution.

　　存儲區域劃分：建立三級存儲體系，包括新液庫、在役液暫存區、廢液收集池。各區域設置物理隔離屏障，配備獨立通風系統。

　　Storage area division: Establish a three-level storage system, including new liquid storage, in-service liquid temporary storage area, and waste liquid collection pool. Set up physical isolation barriers in each area and equip them with independent ventilation systems.

　　2. 智能監測網絡

　　2. Intelligent monitoring network

　　在線傳感器陣列：在清洗槽、管道關鍵節點部署電導率、pH值、溫度傳感器，實時采集數據。

　　Online sensor array: Deploy conductivity, pH, and temperature sensors at key nodes of cleaning tanks and pipelines to collect real-time data.

　　數據分析平臺：構建邊緣計算節點，對傳感器數據進行實時分析。當指標偏離設定閾值時，自動觸發報警并啟動應急預案。

　　Data analysis platform: build edge computing nodes to conduct real-time analysis of sensor data. When the indicator deviates from the set threshold, an alarm is automatically triggered and the emergency plan is activated.

　　3. 動態調配機制

　　3. Dynamic allocation mechanism

　　清洗液再生系統：對在役液實施膜分離、離子交換等再生工藝，延長使用壽命。實測顯示，該技術可使清洗液使用壽命延長3-5倍。

　　Cleaning solution regeneration system: Implement membrane separation, ion exchange and other regeneration processes on the in-service solution to extend its service life. Tests have shown that this technology can extend the service life of cleaning solutions by 3-5 times.

　　智能補液裝置：根據清洗液消耗速率，自動計算補液量。采用蠕動泵進行精準投加，避免人為誤差。

　　Intelligent fluid replacement device: automatically calculates the amount of fluid replacement based on the consumption rate of cleaning solution. Using a peristaltic pump for precise dosing to avoid human error.

　　四、技術演進方向

　　4、 Technological Evolution Direction

　　當前研究聚焦三大前沿領域：

　　The current research focuses on three cutting-edge fields:

　　相分離技術：開發磁性納米顆粒吸附劑，實現清洗液中污染物的高效分離。

　　Phase separation technology: Developing magnetic nanoparticle adsorbents to achieve efficient separation of pollutants in cleaning solutions.

　　生物降解技術：培育特異性酶制劑，對有機清洗液進行原位降解。

　　Biodegradation technology: Cultivate specific enzyme preparations to perform in-situ degradation of organic cleaning solutions.

　　數字孿生系統：構建設備運行數字鏡像，模擬清洗液狀態變化，優化管理策略。

　　Digital twin system: Build a digital image of equipment operation, simulate changes in cleaning solution status, and optimize management strategies.

　　通過實施上述分類管理體系，可使多槽獨立排水系統的清洗效率提升40%以上，廢水處理成本降低30%，為精密制造行業提供穩定、可靠的清洗解決方案。

　　By implementing the above classification management system, the cleaning efficiency of multi tank independent drainage systems can be improved by more than 40%, and the cost of wastewater treatment can be reduced by 30%, providing a stable and reliable cleaning solution for the precision manufacturing industry.

　　本文由多槽手動超聲波清洗機友情奉獻.更多有關的知識請點擊:http://www.ebaisha.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from CNC high-pressure cleaning machine For more information, please click: http://www.ebaisha.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message

上一篇：全自動超聲波清洗機：以科技之眼洞察污漬本質
下一篇：噴淋清洗機如何提升去毛刺效率